A hospital bed lift in Sri Ganganagar or Hanumangarh needs a car about 2400 mm deep and a door of 800 to 1200 mm, so a full bed, the patient and an attendant fit inside. Liftmate India Private Limited plans, installs and cares for bespoke hospital bed lifts across the Sri Ganganagar and Hanumangarh districts.
This guide explains, in simple words, how to size a bed lift, where to place it, which safety parts matter and how to keep it running. It is written for hospital owners, doctors building a nursing home, architects and project managers in Sri Ganganagar, Hanumangarh, Suratgarh, Nohar, Bhadra, Anupgarh and nearby towns.
Why do hospitals in Sri Ganganagar and Hanumangarh need a bed lift?
Sri Ganganagar and Hanumangarh are the main medical centres for the canal belt of north Rajasthan. Patients come in from villages and small towns, often lying down on a stretcher. When wards, ICU, operation theatres and scan rooms sit on different floors, a ramp is too long and stairs are unsafe. A bed lift moves a patient between floors in a few calm seconds.
A bed lift is needed in any building where a patient may travel lying down:
- Multi-speciality hospitals with wards, ICU and theatres on different floors
- Nursing homes and maternity homes with two or more floors
- Eye, orthopaedic and day-care surgery centres
- Diagnostic and imaging centres with scan rooms upstairs
- Old-age care homes and rehabilitation centres
Hospital bed lift in Sri Ganganagar: what size should it be?
The most important number is the depth of the car. A hospital bed is long, and the drip stand and attendant need room too. The Indian Standard IS 14665 (Part 1) recommends a car about 2400 mm deep for a hospital lift. The width and door change with the number of persons.
| Persons | Rated load | Car inside (width x depth) | Door opening | Good for |
|---|---|---|---|---|
| 15 | 1020 kg | 1000 x 2400 mm | 800 mm | Small nursing homes and clinics |
| 20 | 1360 kg | 1300 x 2400 mm | 1200 mm | Most multi-speciality hospitals |
| 26 | 1768 kg | 1600 x 2400 mm | 1200 mm | Large hospitals, ICU and OT routes |
Source: IS 14665 (Part 1) recommended sizes for hospital lifts. Shaft, pit and headroom are confirmed at the Liftmate site survey. For most hospitals here, a 1300 x 2400 mm car with a 1200 mm door is the comfortable choice. A bed turns in without bumping, and a monitor trolley still fits.
What changes for hospital buildings in north Rajasthan?
Three local points shape a good bed lift plan in Sri Ganganagar and Hanumangarh.
- Heat and cold: summers are very hot and winters are cold. We plan airflow at the top of the shaft, a cabin fan and shade for any machine space, so the ride stays calm in every season.
- Dust: fine dust settles on door tracks and sensors. Sealed door sills and regular cleaning keep doors closing smoothly.
- Power cuts: a patient must never be stuck between floors. An automatic rescue device and a link to the hospital generator are planned from day one.
Many nursing homes also grow from a house or a small block. We check walls, slabs and space for a new shaft before any design is fixed.
How do you plan a bed lift for a hospital: 7 steps
- List the patient routes: casualty, wards, ICU, OT and scans.
- Choose the car size from the table above.
- Place the lift close to casualty and the OT floor, away from public waiting areas.
- Book a Liftmate site survey to confirm shaft, pit, headroom and power.
- Plan Electrical Inspectorate permission in Rajasthan before installation.
- Agree the finish: stainless steel or easy-clean panels and a non-slip floor.
- Install, test, train staff and start a dedicated care programme.
For the full planning basics, read our hospital bed lift planning guide. For hospitals in the Hadoti region, see the hospital bed lift in Kota guide.
Bed lift, passenger lift or dumbwaiter: which does a hospital need?
Most hospitals need more than one kind of lift. Each one does a different job.
| Lift | Main job | Car shape | Where it goes |
|---|---|---|---|
| Bed lift | Patients on beds and stretchers | Long and deep, wide door | Near casualty, ICU and OT |
| Passenger lift | Visitors, staff and walking patients | Wider than deep | Near the main entrance |
| Dumbwaiter | Medicines, samples, linen and food | Small cabin, no riders | Pharmacy, lab and kitchen routes |
Keeping these jobs apart keeps the bed lift ready for patients when it matters. Read more on small service lifts in our dumbwaiter lift guide.
Which safety features should a hospital bed lift have?
- Precise levelling: the car floor stops level with each floor, so bed wheels roll in smoothly.
- Soft start and stop: a whisper-quiet, steady ride for patients after surgery.
- Automatic rescue device: moves the car to the nearest floor in a power cut.
- Door sensors: doors stay open while a bed is moving through.
- Overload sensing: the lift will not move if the load is too high.
- Attendant control: staff can hold the lift for a patient trip.
Our guide to lift safety systems explains each of these in plain words.
How do you keep a bed lift running every day?
A hospital lift works many times a day, every day of the year. Regular care keeps it safe and avoids stops at busy hours. A good programme includes planned visits, checks of the rescue device, door sensors and levelling, cleaning of door tracks and quick response when something needs attention. See what a lift care programme should include.
FAQs
Who installs hospital bed lifts in Sri Ganganagar?
Liftmate India Private Limited designs, installs and cares for hospital bed lifts in Sri Ganganagar and Hanumangarh. Each project starts with a site survey and a lift drawing for your architect.
What car size does a hospital bed lift need?
IS 14665 (Part 1) recommends a car about 2400 mm deep. A 1300 x 2400 mm car with a 1200 mm door suits most multi-speciality hospitals.
Can a bed lift be added to an existing nursing home?
Often, yes. We check walls, slabs, pit depth and headroom first. A new shaft can sometimes be built outside the main wall.
What happens to a patient in the lift during a power cut?
An automatic rescue device moves the car to the nearest floor and opens the doors. A link to the hospital generator is also planned.
Do you serve towns like Suratgarh, Nohar and Bhadra?
Yes. Liftmate serves hospitals and nursing homes across the Sri Ganganagar and Hanumangarh districts.
श्रीगंगानगर और हनुमानगढ़ में अस्पताल बेड लिफ्ट कौन लगाता है?
लिफ्टमेट इंडिया प्राइवेट लिमिटेड श्रीगंगानगर और हनुमानगढ़ के अस्पताल और नर्सिंग होम के लिए बेड लिफ्ट डिज़ाइन, इंस्टॉल और सर्विस करती है। केबिन लगभग 2400 मिमी गहरा और दरवाज़ा 800 से 1200 मिमी चौड़ा होना चाहिए। लिखें: info@liftmate.in
Request a private design consultation or book an architect meeting for your hospital or nursing home. Send your floor plans to info@liftmate.in.
Last updated: 13 November 2026
Related: hospital bed lift sizes for Ajmer and Bhilwara hospitals
Who installs hospital bed lifts in Hanumangarh and Churu?
Liftmate India Private Limited, Jaipur, designs, installs and cares for hospital bed lifts in Hanumangarh, Churu and nearby towns. A bed lift for a hospital or nursing home here usually needs a car about 2400 mm deep, a 1200 mm door, an automatic rescue device and a generator link. Each project starts with a site survey.
Hanumangarh and Churu hospitals see long summer heat, fine dust from the Thar side and patients who arrive lying down from far villages. A bed lift here is a daily clinical tool, so it must be sized, sealed and cared for with that in mind.
District service table: Hanumangarh and Churu
| Town | Typical building | Bed lift we usually plan | Local point we check |
|---|---|---|---|
| Hanumangarh Junction and Town | Multi-speciality hospital, G+3 to G+5 | 1300 x 2400 mm car, 1200 mm door | Generator link and peak OPD hours |
| Nohar, Bhadra, Rawatsar | Nursing home grown from a house | Bed lift in a new outside shaft | Slab strength and pit depth |
| Pilibanga, Sangaria, Tibbi | Small hospital or diagnostic centre | Compact bed lift or stretcher lift | Level, step-less entry at ground floor |
| Churu city | Hospital, maternity home, college block | 1300 x 2400 mm car, 1200 mm door | Heat and dust sealing of landing doors |
| Sardarshahar, Ratangarh, Sujangarh, Rajgarh (Sadulpur) | Nursing home, dialysis or eye centre | Bed lift or stretcher lift | Power backup and rescue device |
What to write in a hospital bed lift tender or brief
Many hospital owners in Hanumangarh and Churu ask what a good bed lift brief should contain. Use this spec sheet as a starting point for your architect or tender document:
| Line in the brief | What to write | Why it matters |
|---|---|---|
| Car size | About 1300 x 2400 mm inside, or as per IS 14665 (Part 1) hospital sizes | Bed, patient and attendant fit together |
| Door | Automatic side-opening door, 1200 mm clear | Bed turns in without knocking the frame |
| Levelling | Precise levelling at every floor | No bump for a patient on a trolley |
| Rescue | Automatic rescue device plus generator link | Car reaches a floor in a power cut |
| Priority | Hospital service or code-blue switch | Staff can take the lift for an emergency |
| Car finish | Wipe-clean panels, anti-slip floor, handrail | Hygiene and safe standing |
| Dust and heat | Sealed landing doors, shaft vents, cabin fan | Smooth doors through the dust season |
| Care | Planned care visits with a written log | Fewer stops at busy hours |
Standards such as IS 14665 and EN 81-20 are named here as general education. Your lift drawing and the Rajasthan lift permission confirm what applies to your building.
हनुमानगढ़ और चूरू में अस्पताल बेड लिफ्ट: सवाल और जवाब
हनुमानगढ़ में अस्पताल बेड लिफ्ट कौन लगाता है? लिफ्टमेट इंडिया प्राइवेट लिमिटेड, जयपुर, हनुमानगढ़, नोहर, भादरा और पीलीबंगा के अस्पताल और नर्सिंग होम के लिए बेड लिफ्ट डिज़ाइन, इंस्टॉल और देखभाल करती है।
चूरू के अस्पताल के लिए बेड लिफ्ट का साइज़ क्या हो? आम तौर पर केबिन लगभग 1300 x 2400 मिमी और दरवाज़ा 1200 मिमी, ताकि बेड, मरीज़ और साथी एक साथ आ सकें। सही माप साइट सर्वे में तय होता है। संपर्क: info@liftmate.in
Related: hospital bed lift planning guide · hospital bed lift in Kota · lift safety systems explained · lift care programme
Request a private design consultation · Book an architect meeting · Email info@liftmate.in
Last updated: 14 November 2026
4 thoughts on “Hospital Bed Lift in Sri Ganganagar and Hanumangarh Guide”
Comments are closed.